Professional development

 

“TRAINING CENTER FOR RETRAINING AND ADVANCED TRAINING OF PERSONNEL ENGAGED IN ENERGY AUDIT, ENERGY SAVING EXPERTISE AND ENERGY EFFICIENCY OR ENERGY MANAGEMENT” at KGIU

conducts training in the following areas:

 

– ENERGY AUDIT: persons with education in technical specialties at the level not lower than technical and professional are allowed to retraining or advanced training in the direction of energy audit.

– EXPERTISE OF ENERGY SAVING AND ENERGY EFFICIENCY: retraining or advanced training in the direction of expertise of energy saving and energy efficiency are carried out for persons with education in technical specialties in the field of energy and (or) in the field of architecture, urban planning and construction at a level not lower than technical and professional.

– ENERGY MANAGEMENT: persons with education in technical and (or) economic specialties at the level not lower than technical and professional are allowed to retraining or advanced training in the direction of energy management.

Duration of training: retraining-250 hours, advanced training-120 hours.

 

The center is equipped with the following equipment:

 

  1. Gas analyzer Testo 330-11-designed to perform professional analysis of flue gases.
  2. Analyzer AKE-824 . Microprocessor recorder-analyzer of electric energy quality in single-phase and three-phase electric networks
  3. Heat flow meter ITP-MG 4.03 / 5. It is designed to measure the density of heat flows passing through single-layer and multi-layer enclosing structures of buildings and structures in accordance with GOST 25380, through the cladding and thermal insulation of power facilities during experimental research and in operation.
  4. Ultrasonic flowmeter + thickness gauge “Akron”.
  5. Current pliers ATK-2038.
  6. Pressure gauge DMC-01M. Professional device for measuring pressure, vacuum and pressure difference of gases, as well as to determine the speed and flow rate of gas and air flows using pressure tubes “NIIOGAZ” or ” PITO “(according to GOST 17.2.4.06-90 and GOST 8.361-79).
  7. Disto laser rangefinder.
  8. Correlation leak detector T10.
  9. Thermal Imager Testo 882.
  10. Luxmeter-yarkomer TKA PCM 02.
  11. Contact thermometer TC-5.06.
  12. Infrared thermometer AKIP-9304.
  13. Anemometer TKA.
  14. Vibration analyzer SD-21.
  15. The vibration meter BALTECH VP-3410